Blesk může být nebezpečnou a ničivou silou přírody. Nasazení systémů ochrany před bleskem k ochraně budov, vysokých stromů a dalších staveb je zásadní. Klíčovou součástí systému ochrany před bleskem je bleskosvod. Zařízení je navrženo tak, aby zachytilo údery blesku a bezpečně svedlo náboj k zemi. V tomto blogu to prozkoumáme bleskosvods, jejich účel a jak fungují. Bleskosvody come in many different shapes and sizes, including hollow, solid, pointed, round, flat, and even furry. However, the most important feature of the bleskosvod is that it is made of conductive materials such as copper and aluminum. Copper and its alloys are the most commonly used lightning protection materials. TRSB series bleskosvods are used to protect buildings, tall trees and other objects from lightning strikes. When installing a bleskosvod, it is very important to ensure that it is grounded and complies with IEC/GB standards. Each type of bleskosvod has different high standard specifications. The function of the bleskosvod is to prevent the bleskosvod of the exciter and the reflector in advance, and at the same time to ensure the insulation of the collector. The tips of the actuators and reflectors have special structures that allow the actuators to absorb and store energy from the electric field. The reflector is well connected to ground and has the same potential. Exciters and reflectors have a certain electromagnetic field strength. Before a lightning strike occurs, the bleskosvod will accumulate heterogeneous charges due to electrostatic induction. As a result, the electric field strength suddenly increases the excitation voltage between the reflectors, and the tip sparks break down the surrounding air. This ionized air makes the bleskosvod a central collection of bleskosvods in a very short time and releases the energizer. Due to its special structure, the bleskosvod produces a faster upward discharge channel than ordinary bleskosvods. When installing bleskosvods, it is important to follow some precautions. The bleskosvod should be installed at the highest point of the building to ensure that it intercepts lightning strikes. It should also be installed by a qualified professional trained in lightning protection systems. Misusing bleskosvods can be dangerous and ineffective, so guidelines should be followed. In conclusion, lightning protection systems are essential to safely intercept lightning strikes and prevent damage or injury. Bleskosvody are a key component of these systems, designed to intercept lightning strikes and conduct the charge safely to ground. They come in many different shapes and sizes, but all serve the same purpose - to protect structures from dangerous forces of nature. By following proper installation methods and precautions, bleskosvods can provide the peace of mind you need during severe weather.

---

Čas odeslání: May-05-2023